If you are looking for a great quick rug cleaning job you should look no further than your own home. There are actually a few steps that you will want to follow to clean your carpet and rugs. First, you will want to gather the following items: Your rugs, soft-bristled brush, bucket, water, towels, and rubber gloves. Here is what you will need to have readily available to complete a professional-grade rug cleaning job: Your rugs, a soft-bristled brush, buckets, water, towels, and rubber gloves. Now here is what you will do with each of your items: To begin with you will want to thoroughly wash and dry your rugs. To help deter soil build up, you may consider sprinkling a light layer of baking soda over your rugs once they are completely cleaned.
After the rugs have been washed, thoroughly dry them in the open sun. This will help to minimize the amount of time your carpets and area rugs take to dry. Once they are completely dry, place them in your lined baskets and tie with rubber gloves. This will help you reduce the risk of introducing bacteria and allergens to your home.
Next, it is necessary that you remove dirt, soil, and grime from your rugs using a chemical cleaner. You can use a mild soap, or you can use one of the stronger chemicals for tougher dirt and stains. When you are doing an area rug cleaning session, be sure to rinse your rugs and towels thoroughly. If you do not, then you run the risk of introducing more dirt to the fibers. You do not want to use too much water when cleaning, since this can cause the chemicals to become too weak and the rugs to lose their strength.
After you have removed all of the previous stains on your rugs, you will need to focus on getting the new stains out. You should try your best to avoid touching the stained areas, because you want to get the stains out of the fabric as quickly as possible. To do this, you should apply the chemical cleaner directly to the stain and let it sit for a few minutes. Then, blot the area with a white cloth or tissue. Repeat this procedure until all of the stains are removed.
If there are any spotless areas in your carpet, you can actually go ahead and vacuum them first before you wash them. Spots can be removed easily with a wet vac, and they will be much easier to remove if you do not disturb the fibers while you are working on them. In order to make sure that you are getting all of the dust and dirt particles out of your carpet, you can apply the dry-cleaning solution. The dry-cleaning solution is actually designed to give your carpets a nice, shiny appearance, but you will still need to brush it into the fibers. Use the brush, and gently work it into the fibers until they look nice and shining.
When you have completed the first steps (steps one and two), you should move on to the third step. This step involves getting rid of the spot that you did not get out using the vacuum. You will need to get another vacuum that is specially made for cleaning rugs and start vacuuming the area once again. This step will require you to work on a full rotation, so make sure to take your time. If your rug still looks dirty after going through this process three times, then you should purchase a chem-dry machine instead of a regular vacuum cleaner to make the process go faster.